Solutions

Our passionate and experienced people deliver successful clean energy projects globally.

Our offices

Like our business, we’re truly global – but proudly local. Find contact and location details for every RES office.

Contact us

The data is there. Getting to it is the hard part.

by RES | Nov 17, 2026 | Reading time: 4 min

By Callum McLean, Data Delivery Manager, Digital Solutions – Asset Performance Management

Every wind turbine and solar inverter on a renewable site generates a constant stream of operational data. In theory, that data should tell owners exactly how their assets are performing, where energy is being lost and what is likely to fail next.

In practice, a surprising amount of it is out of reach.

At RES, we manage a large and varied operational portfolio. That gives us a clear view of how difficult data acquisition can be, and why it remains one of the least discussed barriers to better asset performance.

Why this matters

Better analytics, predictive maintenance and AI all depend on one thing: reliable access to good data. Without it, performance losses go unnoticed for longer and decisions are made on partial information.

Why renewable data is so hard to reach

Most wind and solar portfolios mix equipment from several manufacturers, each with its own SCADA system, protocols and data formats. The same measurement can have a different name, unit and sampling rate on every site.

Access is often restricted. Under many service agreements, the manufacturer controls the data, and owners may receive only 10-minute averages, while higher-resolution data is withheld or charged for separately.

Sites are remote, connectivity is unreliable, and cyber security requirements rightly demand careful review before any operational system is connected to the outside world.

And then there is legacy technology.

When security standards move on, but the site does not

Transport Layer Security (TLS) is the standard that encrypts data as it travels between systems. Older versions were retired in 2021 because they are no longer considered secure, and modern servers and cloud platforms now refuse to use them.

Many site SCADA servers were installed long before this change and cannot support the newer versions. When our own systems were updated, the connection to these servers simply stopped working. The data was still being recorded on site, but we could no longer retrieve it.

The obvious workaround, re-enabling the old protocols on our side, is not something our cyber security team would accept, and rightly so. The long-term fix is to upgrade the site server, but that depends on the manufacturer and can take a long time.

A real example: an operational wind farm in France

At one wind farm we support in France, a TLS incompatibility on the site’s SCADA server meant that SCADA data was no longer reaching our proprietary Asset Performance Management (APM) solution. Without it, performance reporting for the site was effectively blind.

An AnemoLive edge box, developed by the Anemo Analytics team that joined RES in 2022, was already installed at the site, connected directly to the turbines. That gave us a way around the problem.

The fix: a permanent data feed straight from the turbines

The original plan was to read data from the existing SCADA server through the edge box. Early on, however, the team found periods where the SCADA server was missing data that the edge box still held. So they changed the design: the new pipeline takes data directly from the turbines, bypassing the legacy server completely. The site no longer depends on it at all.

The automated feed was fully operational and tested eight weeks after kick-off, within the original timeframe, despite a grid and communications outage at the site during commissioning.

Better data, not just restored data

The project did more than reconnect a site. It improved the quality of what we receive:

  • Where one turbine was failing to store 10-minute records, missing values are now rebuilt automatically from high-frequency turbine data, giving better coverage than the original SCADA system provided.
  • 13 undefined alarm codes identified and passed to the asset management team, preventing future import failures.
  • A permanent, automated daily feed into our APM, supported through our normal support process.

Beyond one site: tackling the wider challenge

The same approach works well beyond a single wind farm. AnemoLive, and its solar equivalent HelioLive, act as a data pump: software that collects data at source, standardises it and delivers it to the systems that need it. Each part of the design addresses one of the barriers described above.

Fragmented technology

The software already connects to a wide range of wind and solar equipment, including Siemens Gamesa and Vestas turbine platforms and inverters from manufacturers such as SMA, Sungrow, Huawei and KACO. It also supports standard industrial protocols (OPC UA, ODBC and Modbus TCP), which means new variants can often be added in a short timeframe. Whatever the source, data is delivered in one consistent format, with common asset identifiers, timestamp conventions and tag names, and a standardised set of operational status categories.

Limited data resolution

Rather than relying only on the 10-minute averages held on a central SCADA server, AnemoLive collects highfrequency operational data directly from each turbine or inverter through its native interface. That is what allowed missing 10-minute records to be rebuilt at our French site.

Legacy systems

Because the software communicates with equipment locally, on the site network, it does not depend on the age or security settings of the central SCADA server. Where that server is unreliable, it can be bypassed completely.

Cyber security

The on-site edge box is hardened to an industry-standard security benchmark (CIS Level 1) and sits in a central location such as the main substation. Only processed data leaves the site.

The takeaway

This project shows that legacy technology does not have to be a dead end. With the right tools on site, it is possible to restore access securely and end up with better data than before.

If you are facing similar challenges across your own wind and solar portfolio, please get in touch.

About:

Callum McLean, Data Delivery Manager, Digital Solutions – Asset Performance Management

Callum leads the team that brings data from wind and solar sites into RES’ asset management platform. He oversees customer and site onboarding, manages the data engineering team and is responsible for delivering RES’ data pipelines.

With nearly 30 years of experience working with data, more than 20 of them in renewables, Callum has delivered software, IT and geospatial services across the sector. Before joining RES in 2021, he progressed from IT Manager to Head of Innovation and Data, shaping how renewable businesses use data to make better decisions.

He began his career building customer data sets for some of the largest companies in retail, finance and telecoms, an early grounding in turning complex data into insight people can act on. 

Share this article

Related Services

Digital solutions

Read more
Anemo

Unlock the full potential of your operational data with our remote diagnostic services and performance optimisation tools tailored for wind and solar plants.

Read more
Asset Management

Read more

Related technologies

Wind

Read more
Solar

Read more